Help! SPP hp proliant Gen 8 update

[daruiz]

Good afternoom,

I have a problem with the hp proliant server G8, Can you help me ?

I want to update the spp and I get this error message:

"typeError: ipscript is undefined.

Regards.

[Torsten.]

What exactly are you doing?

Boot and run from USB / run from WIndows / Linux ... etc ... ?

If from USB - how did you create it?

[daruiz]

Hi,

I want to update the firmware, it's currently version 2014, I run from USB the ISO "P03093_001_SP_GEN8 1.4 but not working.

I cannot acces to the ILO because doesn't working, so I want to update the firmware.

The server is restoring everyday.

Regards

[Torsten.]

Did you use the USBKeyUtility to create the USB (included in the ISO)?

[daruiz]

Good afternoon,

Yes, I use the USBKeyUtility, but not working.

" TypeError: ipscript is undefined"

Regards.

[Torsten.]

Try this

https://spp.hpe.com/custom/#/sources/YnAwMDI5OTAuMTUxMDkzNDk5NQ

or this

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_ff582daf008c4f529c4d6c28f6

compare checksum, try another USB.

[RAYA-87]

Good morning

I try the iso P03093_001_SPP-GEN8.1-SPPGEN81.4.ISO not working, the message error " TypeError: ipscript is undefined"

I try other Pen diferent drive and not working.

Regards.

[RAYA-87]

Good morning,

I have one problem also with iLO4 configurations, the message: "ilo 4 not responding system health monitoring is disabled"

How enable a again.

Regards. 

[Torsten.]

Check this:

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00048622en_us