Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

How do I invoke the OSD on a Compaq 3310 KVM OSD?

 
Rick O'Neal
Occasional Visitor

How do I invoke the OSD on a Compaq 3310 KVM OSD?

I have a Compaq rack-mounted 3310 KVM switch (8-ports, ps/2 connectors, P/N 169968-002). There are 4 devices currently connected and the switch works fine manually. My question is; How do I invoke the OSD? Pressing the Print Screen key just sequentially blinks all ports from right to left, but doesn't stop on any active ports and will only stop if the key is pressed a second time. CTRL-CTRL does not work either. Also, how do I update the firmware?
28 REPLIES 28
Alex King
Advisor

Re: How do I invoke the OSD on a Compaq 3310 KVM OSD?

Rick,

I tried attaching the user guide for the above mentioned switch, but it is over the limit allowed (1MB). Can you please post your email address so that I can send to you directly. This should contain answers to your questions. If not please send me details of the issue your are experiencing.
George Bogart
Occasional Visitor

Re: How do I invoke the OSD on a Compaq 3310 KVM OSD?

Can you send me a copy also?

George
Anders Frederiksen_1
Occasional Visitor

Re: How do I invoke the OSD on a Compaq 3310 KVM OSD?

I would also like to have a copy of the manual for the Compaq 3310 KVM
Alex King
Advisor

Re: How do I invoke the OSD on a Compaq 3310 KVM OSD?

Please post your email address so that I can send the manual as it is over the limit for email attachments.
Josh_111
Occasional Visitor

Re: How do I invoke the OSD on a Compaq 3310 KVM OSD?

Can I get a copy also?? you can send it to lipsrahn@gmail.com