Servers - General

How to configure Raid on ML10 V2 server?

 
hangkong
Occasional Contributor

How to configure Raid on ML10 V2 server?

您好:

我有一台HP ML10 V2服务器,ProLiant System BIOS-J10(02/02.2015),2个3T硬盘准备做Raid1。主板bios已经设置为Raid,开机提示按F5时,按F5没有反应。看网上有的写按F10进入智能资源调配,在屏幕下方有F10显示。但我的服务器没有F10显示,按F10也没反应。应该怎样配置Raid,谢谢!

Google Translated

Hello:

I have an HP ML10 V2 server, ProLiant System BIOS-J10 (02/02.2015), and two 3T hard drives ready to be Raid1. The motherboard bios has been set to Raid.

When you press F5 at the boot prompt, pressing F5 has no effect. Look at some writes on the Internet and press F10 to enter the intelligent resource deployment, there is F10 display at the bottom of the screen. But my server does not display F10, and pressing F10 does not respond. How should I configure Raid, thank you!

1 REPLY 1
Emraansy
HPE Pro

Re: How to configure Raid on ML10 V2 server?

Hello,

Please refer to the below link, hopefully this should help.

 

https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0128448


I am a HPE Employee

Accept or Kudo