Install ESXi on onboard M.2 SATA with UEFI boot (DL385 Gen10)

[morinas]

Hello there

Is there a how-to where i can install this Esxi 7.02 (HPE Edition) at the Software RAID? Cant see the drives when booting up from Stick. Only the HW-Raid is visible. IN BIOS mode, the RAID got splitted but this isnt my goal to install it at just one of the disks. 

Second question: I cant enter to intelligent Provisioning anymore. The abort function doesnt work either. How can i abort the whole update or reinstall the current one?

Thanks,

morinas

[morinas]

Update:

I am trying to help myself....

The second problem with the "intelligent provisioning" is fixed. It just needed patience.

[ksram]

Hi,

Please follow the steps mentioned on article : https://assets.ext.hpe.com/is/content/hpedam/a50001956enw

Thank you

RamKS

[morinas]

Unfortunately too late. I took out the SW-RAID M.2-SATA and installed the ESXI on the HW-RAID where the main memory is located. A week until a response is a bit long...we needed a solution within one to two days.