Installation Rack and Power Management

[Wertz]

Le logiciel de gestion d'énergie Rack and Power Management en version 1.1 n'est actuellement pas certifié pour la RedHat v3 et v4. Je n'ai par ailleurs pas réussi à l'installer sur chacune des deux versions.

Existe-t-il une version de développement qui supporte ces nouveaux OS ? Est-il prévu ? Y a-t-il une éventuelle possibilité d'utiliser NUT (http://www.networkupstools.org/) avec les UPS H

[Bill Place_1 · Accepted solution]

Wertz

There are non plans to certify additional OSs for HP Rack and Power Manager. HP Rack and Power Manager is in a sustaining only phase, i.e. no new features or OSs will be qualified.

I would recomend that you use the HP Power Manager product for support for Redhat v3. Redhat v4 is not qualified at this point but there are plans to qualify it at future date. One other point. HP is about to release a new version of HP Power Manager this month. Version 4.0

Bill

[Wertz]

Thanks a lot for your reply. This will be very helpfull. I'm just sad that I cannot use the SNMP Adapter on my UPS.

[Wertz]

All works fine with the HPPM and a serial cable !