Servers - General

Installation Windows server 2016 sur HP Proliant DL180 Gen9

 
Misaina
New Member

Installation Windows server 2016 sur HP Proliant DL180 Gen9

Bonjour,

J'aurai besoin de votre aide car j'essaie d'installer Windows Server 2016 via USB sur mon HP Proliant DL180 Gen9 en mode RAID.

Lorsque je lance le boot UEFI, rien ne se passe. Le Bios me ramène toujours sur le System Utilities

Pouvez-vous m'aider je vous prie ?

Merci déjà

Google Translated

Hello, I will need your help because I am trying to install Windows Server 2016 via USB on my HP Proliant DL180 Gen9 in RAID mode.

When I launch the UEFI boot, nothing happens. Bios always brings me back to System Utilities

Can you help me please?

Thanks already

1 REPLY 1
SanjeevGoyal
HPE Pro

Re: Installation Windows server 2016 sur HP Proliant DL180 Gen9

Hello,

I hope all is well.

I would request you to request you update the server with the latest bios and firmware before OS installation.

Latest Bios:2.76

Latest iLO5 firmware:2.73

Set the first boot as SA controller from the system bios.

You have to create a raid group or logical drive if you did not configure the raid group.

I would request you install the OS by the Intelligent Provisioning because it is the easiest bay to OS installation.

Intelligent Provisioning for Gen9 Servers

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_6912b1ab040b4e23952cba99c2

Share the error message if the issue still persists.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

 


I am a HPE Employee

Accept or Kudo