Lan console setup

[Lacrosse]

Can someone point me to some good documentation for LAN console setup

[Pete Randall]

If you're referring to the Secure Web Console, you could start with this (it's RP5400 specific but should be applicable to other platforms):

http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A5191-96022/A5191-96022_top.html&con=/hpux/onlinedocs/A5191-96022/00/00/20-con.html&toc=/hpux/onlinedocs/A5191-96022/00/00/20-toc.html&searchterms=web%7cconsole%7csecure&queryid=20030820-084322


Pete


(Go UT)

[Stuart Abramson_2]

Here is info for GSP LAN console for SuperDome. Other new servers (rp7415) are similar:

http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/A5201-10006/A5201-10006_top.html&con=/hpux/onlinedocs/A5201-10006/00/00/29-con.html&toc=/hpux/onlinedocs/A5201-10006/00/00/29-toc.html&searchterms=lan%7cconsole%7cgsp&queryid=20030820-093002

The idea is:
0. Get an IP address from LAN group.
1. Connect LAN console port to LAN.
2. Plug in laptop to regular console port.
3. log in to GSP.
4. Get a GSP prompt
5. type "lc"
6. Enter IP, gateway, etc.
...