No web access on ilo 3 shared port ml110 g7

[Globus]

Hi, I've ml 110 g7 with ilo 3 shared network port enabled, if I want access web inteface, where is no reaction. Scanning IP got 2 ports active 17988 & 17990. That the reason? I've the latest firmware on all ml 110. Thx,

[SanjeevGoyal]

Hello,

Please try the below settings.

Resetting iLO to the factory default settings by using iLO RBSU
1. Restart or power on the server.
2. Press F8 when prompted during POST.
iLO RBSU starts.
3. Select File→Set Defaults.
iLO RBSU prompts you to confirm the request.
4. Press F10 to continue.
iLO RBSU displays the following message:
After setting to factory defaults, iLO 3 will be reset and this utility will exit.
5. Press Enter.
iLO resets and the server boot process finishes.

Or follow the below customer advisory.

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00046115en_us

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[Globus]

Hi, thx for reply. Theese steps are usual for that situation in all threads ww but unfortunately it doesn' help. Http (80) port unavailable, only Ilo is reacheable. Does it mean I need to buy dedicated hardware port?

[SanjeevGoyal]

Hello,

I would suggest you have a proper case be logged with HPE, and share the appropriate logs for further analysis.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,

[Torsten.]

Be aware the server itself cannot access ILO if both using the shared NIC.

[Globus]

Unfortunately where is no warranty subscription for that server.

[Globus]

Could you please clarify? I'm going to shared ILO port IP from IE11 from another machine in the same subnet.

[Globus]

@Torsten. Could you please to be so kind and describe you mean?