Servers - General

Proliant ML310 Gen 8 v2 startup failure

 
SOLVED
Go to solution
steveli
Occasional Contributor

Proliant ML310 Gen 8 v2 startup failure

I am experiencing startup failure of a Proliant ML310 Gen8 v2 server. Initialization reaches 20% but hangs at Memory checkup.. I

2 REPLIES 2
mitchd123
Collector
Solution

Re: Proliant ML310 Gen 8 v2 startup failure

Suggest you try  reseating the memory dimms.  if that doesn't work, take it down to a base memory config with 1 or 2 dimms.  By swapping dimms in and out you can determine which dimm may be failing.   If that doesn't work you can also reset the bios to default settings. 

SanjeevGoyal
HPE Pro

Re: Proliant ML310 Gen 8 v2 startup failure

Hello,

 

I would suggest you share the POST error message or IML error  for further investigation.

 

You can try to power drain for boot the server.

(Power off the server ,remove both all the power cable from the server and hold on power button for 30 sec.)

 


I am a HPE Employee

Accept or Kudo