Servers - General

Raid 10 array on DL380 Gen 8 1716 post errors

 
Joshua452
New Member

Raid 10 array on DL380 Gen 8 1716 post errors

Hello Every one,

 I have a server that has recentlly had 2 similtaneous disk failures ona raid 10 configuration. 

Disks have ben replaced and rebuilt without any issue but now we are having these post errors and I have seen that there is HPE advisory saying that this could be a firmware bug on the disks.

I am planing on upgrading the firmware and running offline hardware diagnostics.

How do I check via Esxcli if this is Zero memory raid configured as it has a 2GB cache module on the array controller 

Thanks,

Joshua

1 REPLY 1
SanjeevGoyal
HPE Pro

Re: Raid 10 array on DL380 Gen 8 1716 post errors

Hello,

 

I would suggest you take the complete data backup before hard disk firmware updates.as well as you have to log a proper case with HPE, and share the appropriate logs for further analysis.

 

Otherwise, you can lose your data.

 

Regarding the POST error message:1716 post errors .Follow the below customer advisory.

 

Advisory: HPE Smart Array Controllers - "1716" Power-On Self-Test (POST) Error Message May Be Observed On HPE Servers Configured With HPE Smart Array Gen8, Gen9 or SR Gen10 Controllers

 

https://support.hpe.com/hpesc/public/docDisplay?docId=a00104843en_us&docLocale=en_US

 

If you feel this was helpful please click the KUDOS! thumb below!   
Regards,

 


I am a HPE Employee

Accept or Kudo