Re : Lansafe

[Vincent_5]

Hi,
Can anyone kindly help, I'm trying to setup a R3000XR UPS on a L1000 HP Unix server. I have install the lansafe software, but somehow or rather it doesn't seems to be able to communicate with the UPS port on the L1000 server. Please advice how can I setup this UPS.


Regards
Vincent

[malvin drakley]

Hi Vincent, have you tried going into SAM and looking under peripheral devices, there is a section for configuring your UPS
hope this helps
malvin

[Vincent_5]

Hi,
Thanks for the info, but this model of UPS is not like power trust where you can configure it in sam. It can only be manage with a third party software . I have try with a RP5470 it work and don't know why L1000 doesn't . Please help ???

Regards
Vincent

[Wiktor Jonczyk]

Hi!
Maybe it's too late now but...
Look at my problem:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=531590
Try to discover what kind of GSP card you have. Look for the serial conections cable at the back of the server: the gray M-cable (~octopus?) means ver.A and the black cable means ver.B.
If you have ver.A then I'm afraid you'll have to replace it to v.B.
VicTo(R)