Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP walk not working for HPE PDU

 
Occasional Visitor

SNMP walk not working for HPE PDU

Hi Team,

I am trying to get the active power used on HPE PDU hardware using snmp and I am using cpqpower.mib to get the OID to reterive the power usage of the PDU. However the OID 1.3.6.1.4.1.232.165.2.2 is not working on the PDU.

Any assistance will be appreciated.

Here are the HPE PDU model details.

Model HP 22kVA 400V 3Ph 24out INTL mPDU

 

 

 

2 REPLIES 2
Highlighted
HPE Pro

Re: SNMP walk not working for HPE PDU

Hi Vinod,

It seems the OID used to retrieve power usage is wrong here. Please try using OID 1.3.6.1.4.1.232.165.2.3 for PDU output.

For more detailed object names and identifiers for the CPQPOWER.MIB, please refer http://www.oidview.com/mibs/232/CPQPOWER-MIB.html for all OID.

Regards,

KK

I am an HPE Employee


Accept or Kudo
Highlighted
Occasional Visitor

Re: SNMP walk not working for HPE PDU

Hi,

 

Thanks for your reply. I tried using the OID but i dont get any output.

snmpwalk -v1 -c public hostname 1.3.6.1.4.1.232.165.2.3

Thanks,

Vinod Badnal