Servers - General

Re: Stepped-wave UPS Ok for Microserver gen10+?

 
GardG
Occasional Contributor

Stepped-wave UPS Ok for Microserver gen10+?

Hi all,

I'm looking for an inexpensive UPS for my Microserver gen10+. Most of the options in the price range I'm aiming for (entry-level APC Back-UPS etc) do not have a pure sinewave output when running on battery, but rather an approximated stepped-wave sine. Does the external 12V power brick that comes with the Microserver gen10+ work with a stepped-wave AC input?

The idea is to configure TrueNAS to immediately shut down when a power outage is detected, so operation on battery power would be very brief, and it would be a rare occurence – I think we've only experienced one power outage over the last three years. So I don't particularly care if it's a bit inefficient or sub-optimal as long as it's safe and stable.

1 REPLY 1
SanjeevGoyal
HPE Pro

Re: Stepped-wave UPS Ok for Microserver gen10+?

Hello,

I hope the below links will help you to find out the UPS


HPE Line Interactive Tower Uninterruptible Power Systems 
https://support.hpe.com/hpesc/public/docDisplay?docId=a00050806en_us&docLocale=en_US

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00050807en_us

https://buy.hpe.com/in/en/rack-power-infrastructure/uninterruptible-power-system/c/3446289

 

If you feel this was helpful please click the KUDOS! thumb below!   
Regards,


I am a HPE Employee

Accept or Kudo