You always see this in the version history tab, example DL360 Gen10:
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2b9d3fdd4cce4e1d8d9c6736b3#tab-history
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
Hi,
Please check the BIOS versions and release dates in the version history tab in the download link,
For example :-
DL360 Gen10
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2b9d3fdd4cce4e1d8d9c6736b3#tab-history
DL360 Gen9
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_5789d0706aa04ba6a6aecca7c5#tab-history
Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company
>> The latest system ROM I found for this particular server is U32 2.16, its currently on U32 2.10. I put the SPP on a usb using the hp usb key utility
Did you use the linux version?
For offline SPP usage you need the linux version of firmware bundle.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!