Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

The Compaq EO1004B KVM Switch

 
Kelvin Hung
Occasional Visitor

The Compaq EO1004B KVM Switch

Dear Sir,
I forgot the password to access the KVM.
Can anybody what I can do ?
Thanks
Kelvin
4 REPLIES 4
Robin_37
Trusted Contributor

Re: The Compaq EO1004B KVM Switch

Hi Kelvin

Please read the attachment

Rob
Kelvin Hung
Occasional Visitor

Re: The Compaq EO1004B KVM Switch

Dear Rob,
Thanks for your documents.
But I can not find the answer to reset the screen saver password .
Actually I didn't input any password, maybe I press the wrong key , so the screen saver was locked.
Can you advise how can I use the MS HyperTerminal (Connect to the serial port) to manager the server console switch ?

Thanks
Kelvin
Robin_37
Trusted Contributor

Re: The Compaq EO1004B KVM Switch

Connect the serial port of the switch to the COM port of your PC. Use a straight through RS232 cable. You will need to know the number of the PC's com port. Note: For Windows 95 and Windows 2000, please use COM1 port.

and try to connect to the console switch serial port, and enter 5 on the main menu to restore factory defaults, including the original user name and password (Admin/blank

Regards

Robin
Kelvin Hung
Occasional Visitor

Re: The Compaq EO1004B KVM Switch

Dear Robin,
Thanks so much !
I will try to use reset the password in Winxp- Hyper Term, with the Comport Cable.

Before I do it , Can you advise the parameter of the Com Port ? Such as the Bit Rate, Bit Rate, Parity, Stop Bits, Flow Control (Default:9600,8,N,1,Hardware) .

Thanks
Kelvin