Servers - General
cancel
Showing results for 
Search instead for 
Did you mean: 

UPS SNMP Management

 
L.Scott
Occasional Visitor

UPS SNMP Management


I've got a R5500 XR UPS with an SNMP card - I'm trying to work out how to configure the card with an IP address so I can use the power manager to monitor it, etc.

Any ideas how to configure this?

Thanks.
1 REPLY 1
Brian Vo
Trusted Contributor

Re: UPS SNMP Management

Set your Hyperterminal to 9600,8,1,N and then hotplug the card. Once serial port is connected, a service menu would be displayed. Use IP command to enter new IP address and NM for Netmask