Update DL380 G10 server via USB Key Utility (SPP)

[RAID0]

Hi

I want to upgrade  6 DL380 G10 to SPP 2021.5. Bootable usb create successfully with USB key utility from ISO inside and i can boot with it.but when I select either auto or interactive from menu it goes to a black page with a fixed dash on left and freeze.

Any kind of help is highly appreciated

[Torsten.]

Did you try with virtual media?

[RAID0]

Hi

Thanks to your answer. Yes but it didnot works.  I gues it has a problem but i donot know what is it. It even enter F10 but when I select one of options just enter a freezed black screen. but I upgrade other server with virtual media with no problem

[ksram · Accepted solution]

Hi,

Please share the below : 

> iLO Firmware version

> BIOS Firmware version

> IP Version

Also try updating the above three and try running SPP.

Thank you

RamKS

[RAID0]

Dear Ksram

I successfully mount spp 2021.5 to 5 out of 6 my G10 server via ILO and update them . but i donot know how can I update 

iLO Firmware version

> BIOS Firmware version

> IP Version

sepratly. SPP 2021.5 is about 9 GB. what does it do ? what is updated with it? 

do i need  to update my intelegent provisioning or other part of server sepratly?

why in updated servers system rom version is U30 v2.42 and shows date  (01/23/2021)? i think it must be  5.x.2021. because the SPP is 2021.5

thank you.

[Torsten.]

>>

but i donot know how can I update iLO Firmware version

Just boot from SPP, select interactive mode and let it run.

It shpuld update everything that need an update.

[ksram]

Hi,

Please refer the below links : 

Download link : https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_fb5dcb4cba3b44a8b6c5fc1352

Downloading and Installing an SPP : https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00026884en_us

You can follow the below : 

1) Copy the ISO on shared folder

2) iLO GUI > Virtual Media > Select the ISO

3) Restart the Server and go to "One Time Boot Menu" (Press F11 during boot)

4) Now Server will boot from SPP ISO.

5) Select Automatic / Interactive and follow onscreen instructions.

If you select Automatic : all Components will get updated.

If you select Interactive : You will get a list of Components, you can choose and then apply Firmwares on only those you have selected.

6) Once its successfully completes, let the Server boot.

Thank you

RamKS

[Torsten.]

Current SPP version:

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_4b930b72f7e546549ca29d9f7e

SPP2021.04 for Gen10