Upgrading Server to Win 10 OS - No Network?

[Steve17]

Hi. Been using a ProLiant MicroServer (PID: 704941-421) with WHS2011 for some time, but not connecting to PC's using Win 10 OS anymore. The Server updates to Win 7 Pro 64 bit with no problems. Updating to Win 10 Pro 64 bit and loses connectivity with the ethernet network. Suspect it needs a Win 10 driver for the HP Broadcom 1GB ethernet adaptor. Any suggestions please?  

[Anu_K]

Hello,

As per the quickspecs of the server(https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04111079&#) looks like this server has Embedded NC107i PCI Express Gigabit Ethernet Server Adapter(Broadcom Adapter).

You can download the drivers using this link based on the operating system installed on the server: https://support.hpe.com/hpesc/public/km/product/3811486/Product#t=DriversandSoftware&sort=relevancy&layout=table&numberOfResults=25&f:@kmswtargetbaseenvironment=[Microsoft]&f:@kmswsoftwaretypekey=[swt8000113]

[Steve17]

Many thanks for the information.

Updated the driver to cp023987 March 2015.

Still not connecting to the ethernet, so I suspect that the driver is not compatible with Windows 10.

Guess it is unlikely that any more driver updates will be issued.

Be a pity to scrap the Server because of this.

Steve

[ksram]

Hi Steve17,

Good day!

Please try the different Driver versions to check if that works.

If none works may be try re-installing the OS and check if that helps.

If nothing works, may the Adapter itself might be faulty and may needs replacement.

Thank you

RamKS

[Steve17]

Hi RamKS

Thanks for your response. I used the latest driver March 2015. Have reinstalled Win 10 several times with the same result.  The Adapter works ok with Win 7. Surely someone else must have upgraded this MicroServer to Win 10.

Regards Steve

[ksram]

Hi Steve17,

Thank you for replying.

In this Case I suggest you to use any Operating such as Windows 2008 / 2012 to avoid supporting issues.

Thank you

RamKS

[Steve17 · Accepted solution]

Tried various NIC drivers without success.

Solution is to buy a low profile PCIe network card and install it in the x1 slot. Disable the embedded NIC in the BIOS.

Now have internet connection again.