Servers - General

Warning - iLO 4 not responding. System health monitoring has been disable

 
ApolloPT
Occasional Advisor

Warning - iLO 4 not responding. System health monitoring has been disable

Hello everyone,
 
A friend of mine has bought a HP Proliant ML310e Gen8 v2, that camei with a problem in iLO, this server fans are working at full rpm, from prompt its not possible to enter on iLO configuration, the iLO dedicated NIC is getting an IP and the hostname on that port is related with iLO.
 
From a first approach this iLO seems somehow corrupted, and I think that needs to be reflashed. After some search I found some situations where it was indeed corrupted, and now I was trying to reinstall a iLO 4 firmware from scratch through an usb pendrive.
 
Want I've done was:
 
- Installed USB key Utility from HPE.
- Downloaded Smart Update Firmware DVD version 10.10.
- Used USB key Utility, and add the DVD ISO, successfully.
- After that, I add the SCEXE file that contains the iLO 4 firmware in: D:\HPFWUP1010\hp\swpackages
 
After doing this, I trid to boot from this pen drive on that server, but no luck.
 
Do you think that this is in fact an iLO corrupted?
To reflash, is this the way?
How can I reflash an iLO?
 
Thanks in advance!
2 REPLIES 2
Torsten.
Acclaimed Contributor

Re: Warning - iLO 4 not responding. System health monitoring has been disable

Smart Update Firmware DVD version 10.10. is meanwhile more than 10 years old - much too old.

This is the famous NAND issue.

Can you get the Web GUI of ILO?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ApolloPT
Occasional Advisor

Re: Warning - iLO 4 not responding. System health monitoring has been disable

There is no webgui available, and from boot prompt there is no option available to access.