Web console IP address

[David Watts]

how do I change the web console IP address ?

[Ravi_8]

Hi,

Login to web console ( thru browser) and check on the menu Configuration, where you can see the present IP which can be changed.

[Ralph Grothe]

Connect to the webconsole's IP through a Java-capable browser, and change the IP from within the admin menu.
After that reset the console.
If it is an initial setup (or in case you have forgotten the IP), manually reset the webconsole to default settings by pressing the button on top of the console and holding it pressed until the light changes from yellow to green.
After this procedure the console should be initialized to carry the IP 192.0.0.192 (if my memory serves me correctly).
Then again connect to this IP through a browser.
If this doesn't work it could be that you will have to add a host route to the console's IP in your host's routing table from where you started your browser.

[Ralph Grothe]

oops, forgot to mention that the manual reset (while you hold the button pressed) requires the console's mains power to be cycled (i.e. un and replug meanwhile the power supply)

[steven Burgess_2]

Hi

Here's a link to the doc site. Contains tonnes of information

http://docs.hp.com/hpux/onlinedocs/hw/swc/index.html

HTH

Steve