Servers - General
1753797 Members
7902 Online
108805 Solutions
New Discussion

does not start HP Intelligent Provisioning

 
forella
Occasional Contributor

does not start HP Intelligent Provisioning

there is a dl360p gen8 server which has HP Intelligent Provisioning issue freezes on startup. see the screenshot for details.
I tried different IP firmware from 1.62 to 1.72, the result is the same, at 1.62 it hangs on a white screen with the inscription wait 127.0.0.1.

 
1 REPLY 1
Sebasbin
HPE Pro

Re: does not start HP Intelligent Provisioning

Hi forella,

Requesting you to restore the system default settings using the BIOS utility (F9).
>>Upgrade the server BIOS and ILO firmware to the latest versions
>>Then try to re install or upgrade the intelligent provisioning by using different versions(refer-https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c03458406)
>>If the issue persist ,i would suggest to log a support case with HPE for further investigation ,including log analysis.


Note: While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo