cancel
Showing results for 
Search instead for 
Did you mean: 

hp pmp tuning

 
Efim Kushnir
Frequent Advisor

hp pmp tuning

dear sirs,

I have two UPS R3000 and few servers DL380G4 with two power supplies.

How I can tune it through Power Management Pack for normal shutdown and restart if I have power failure ?

Should connect the PS to different UPS for normal work of PMP ?

BR,
Efim.
Look for the answers, do not stop !
2 REPLIES 2
Steve Tran
Trusted Contributor

Re: hp pmp tuning

Are the UPS model R3000 XR or just R3000? Are you suggesting setting up power protection for the servers using redundant UPS (2 R3000 XR)? Today, only HP Rack and Power Manager application support this type of configuration. If you don't plan for a redundant UPS setup but rather split the power protection into 2 separate groups of servers with each group protected by one R3000 XR UPS than I would recommend HP Power Manager. If you are not sure how to install all the software pieces for this, just post your question here.
Efim Kushnir
Frequent Advisor

Re: hp pmp tuning

HP has not solutions for such tuning of UPS with PMP
Look for the answers, do not stop !