secure web console

[jeff go]

thanks guys for the help...

I will give the SWCN install docs a shot and let you all know how I do...

thanks

[Bill Hassell]

The Web Console is fairly easy to troubleshoot. The behavior you describe seems exactly normal. So verify that the box can print to your printer by holding down the selftest button for 1-2 seconds. If that works, then look at the printed output. You'll see the current address setup. If the address is 192.0.0.192, then you need to setup the IP, subnet mask and gateway again.

If the address is OK, then since you moved to a new building, did the subnet address change? Did you have to change the IP addresses on other machines? NOTE: the Web Console is 10Mbit half duplex and if connected to an auto-negotiate switch, it will handle the negotiation correctly.