Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Serviceguard
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring MC/Service guard and Virtual IP address on HP UX 11i v 3

Highlighted
amjadcsu
Occasional Contributor

Configuring MC/Service guard and Virtual IP address on HP UX 11i v 3

Hello,

 

This is a newbie HP_UX sys admin.

We have brought 2 Integrity servers having HP UX 11 v3, to be used as oracle RAC cluster.

 

 

We need to configure Service guard on these servers and configure Virtual IP/Hostname using Service guard.

 

Are there any manuals explaining this or what is the best way forward?

 

Thanks

 

 

P.S. This thread has been moevd from HP-UX > System Administration  to Serviceguard. - Hp forum Moderator

3 REPLIES
Bill Hassell
Honored Contributor

Re: Configuring MC/Service guard and Virtual IP address on HP UX 11i v 3

Here is a link to the manuals:

 

http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults?sp4ts.oid=4162060

 

However, this is not a simple process. Normally, you would take a 2 week course for Service Guard and how to integrate Oracle into a Service Guard package. Or hire a knowledgeable consultant to help with the project.



Bill Hassell, sysadmin
Emil Velez_2
Trusted Contributor

Re: Configuring MC/Service guard and Virtual IP address on HP UX 11i v 3

Hp has a course where we configure Oracle Rac

http://www.hp.com/education/courses/u8601s.html

Emil Velez
Instructor Storage, Servers, HP-UX and Partner Courses
Hewlett Packard Enterprise Education Services
Ask me about training on StoreServ (3PAR) StoreOnce, StoreEasy, StoreAll, StoreVirtual, HP-UX, ServiceGuard and HPE Partner Ready Certification Training

internet: Emil.Velez@hpe.com
Linkedin: http://www.linkedin.com/in/emilvelez

HPE Master ASE Server Solutions Architect V3
HPE Master ASE Storage Solutions Architect V2
HP UNIX Certified (ASE HPUX 11iv3 Administration V1)
Certified HPE Instructor
HPE Product Certified - OneView [2016]
HP Sales Certified -Servers, Converged Systems and Services [2015]
HPE Product Certified - Converged Solutions [2017]

Re: Configuring MC/Service guard and Virtual IP address on HP UX 11i v 3

If you have enough time then go through Managing Serviceguard A.11.20

 

If you want to see some quick output of what it is upto , follow some blogs explaining 'How to setup a simple cluster in SG'.