Node nodo1 is refusing Serviceguard communication.

[antolepore]

HI I have trouble configuring SG_LX_11_19 on CentOS release 5.8 (Final).
when I try to launch the configuration template generator I get the following error:

[root@nodo1 conf]# cmquerycl -v -q nodoqs -C cmclconfig.conf -n nodo1 -n nodo2
Looking for other clusters ... Done
Node nodo1 is refusing Serviceguard communication.
Please make sure that the proper security access is configured on node
nodo1 through either file-based authorization(pre-A.11.16 version) or
access control policies (version A.11.16 or higher)
and/or that the host name lookup on node nodo1
resolves the IP address correctly.
Failed to gather configuration information.

[Matti_Kurkela]

Here is a link for the Managing Serviceguard for Linux book for SG_LX_11_19:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02048872/c02048872.pdf

Have you successfully completed the configuration step "Allowing Root Access to Unconfigured Node" in page 149?

Is your /etc/hosts configured as suggested on pages 150-152?

[antolepore]

---

thanks for the reply Matti_Kurkela, the files are properly configured and I can ssh without a password having exchanged rsa certificates.

[Emil Velez_2]

check if IPF is turned on.. Turn it off or add the SG ports to it.

[chindi]

Have you cloned this from another machine having working serviceguard ?

If yes , then you will have to rename cmclconfig file , and then give it a try .