HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Serviceguard
cancel
Showing results for 
Search instead for 
Did you mean: 

Serviguard failed with cmcheckconf

 
AWFM_GMS_SUPPORT_SYSTEM
Occasional Advisor

Serviguard failed with cmcheckconf

Hi All,

I tried to install HP MCS 11.18 patch level 05 on 2 system Linux Rhel5.2 64bits on 2 DL380 G5 when i issued cmcheckconf system returned error below:

Non-uniform connections detected,
lccse01 eth1 172.19.96.247 successfully received from lccse02 eth0 172.19.96.203
but lccse02 eth0 172.19.96.203 did not receive from lccse01 eth1 172.19.96.247.
This could be due to heavy network traffic, or heavy load or routing configuration on lccse01.
Non-uniform connections detected,
lccse02 eth1 172.19.96.248 successfully received from lccse01 eth0 172.19.96.202
but lccse01 eth0 172.19.96.202 did not receive from lccse02 eth1 172.19.96.248.
This could be due to heavy network traffic, or heavy load or routing configuration on lccse02.
Detected a partition of IPv4 subnet 172.19.96.0.
Partition 1
lccse01 eth1
lccse02 eth0
Partition 2
lccse02 eth1
lccse01 eth0
Failed to evaluate network
cmcheckconf: Unable to reconcile configuration file lccse.conf
with discovered configuration information.

Thank you for you help.
3 REPLIES
Avinash20
Honored Contributor

Re: Serviguard failed with cmcheckconf

This forum is for HP-UX.
I has asked the moderator to move this to Linux.
"Light travels faster than sound. That's why some people appear bright until you hear them speak."
Serviceguard for Linux
Honored Contributor

Re: Serviguard failed with cmcheckconf

First - this is the Linux forum.

The problem is likely two nics on the same subnet from each node. I don't think that is allowed. Is there some reason why you are configuring it that way?

AWFM_GMS_SUPPORT_SYSTEM
Occasional Advisor

Re: Serviguard failed with cmcheckconf

Hi all,

Thank you for you response, you are right the problem came from the subnet, my network team gave me the same subnet for 2 NIC,now they gave me 2 distinct subnet and cmcheckconf works well now.

Regards,

Willy