Serviceguard

failed to start the cluster with an strange error

 
dennischen
Advisor

failed to start the cluster with an strange error

Hi everyone,

I have a test with serviceguard(11.20).

I have finished the  cmcheckconf  and  cmapplyconf  steps. when I " cmruncl -v ", it failed with an error as bellow. confused with the problem, thanks for the help!

 

[root@vm06_01 : /etc/cmcluster]# cmruncl -v
cmruncl: Validating network configuration...
Gathering network information
Beginning network probing (this may take a while)
Completed network probing
cmruncl: Network validation complete
cmruncl: Validating cluster lock disk .... Done
Waiting for cluster to form ....Sep 20 21:18:17 vm06_01 cmnetd[10704]: Assertion failed: NULL != element, file: netsen/cmnetd_ip_hpux.c, line: 1421

Message from syslogd@vm06_01 at Tue Sep 20 21:18:17 2016 ...
vm06_01 cmnetd[10704]: Assertion failed: NULL != element, file: netsen/cmnetd_ip_hpux.c, line: 1421
............................................................................................................................................................................

 

 

The previous check and apply output:

[root@vm06_01 : /etc/cmcluster]# cmcheckconf -v -C cmclconfig.ascii
Begin cluster verification...
Checking cluster file: cmclconfig.ascii.
MAX_CONFIGURED_PACKAGES configured to 300.
Checking nodes ... Done
Checking existing configuration ... Done
MAX_CONFIGURED_PACKAGES configured to 300.
Gathering storage information
Found 4 devices on node vm04-2
Found 7 devices on node vm06_01
Analysis of 11 devices should take approximately 2 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Found 3 volume groups on node vm04-2
Found 5 volume groups on node vm06_01
Analysis of 8 volume groups should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Gathering network information
Beginning network probing (this may take a while)
Completed network probing
Begin file consistency checking
WARNING: /etc/hosts is different across nodes vm04-2 vm06_01
/etc/cmcluster/cmclfiles2check is the same across nodes vm04-2 vm06_01
/etc/hosts has different content on nodes vm06_01, than on nodes vm04-2
/etc/hosts has timestamp "Sep 20 15:36" on nodes vm06_01, "Sep 9 17:42" on nodes vm04-2
WARNING: /etc/nsswitch.conf permissions could not be checked on nodes vm04-2 vm06_01

WARNING: /etc/nsswitch.conf owner could not be checked on nodes vm04-2 vm06_01

WARNING: /etc/nsswitch.conf checksum could not be checked on nodes vm04-2 vm06_01

/etc/nsswitch.conf is the same across nodes vm04-2 vm06_01
/etc/services is the same across nodes vm04-2 vm06_01
/etc/cmcluster/cmignoretypes.conf is the same across nodes vm04-2 vm06_01
/etc/cmcluster/cmknowncmds is the same across nodes vm04-2 vm06_01
/etc/cmcluster/cmnotdisk.conf is the same across nodes vm04-2 vm06_01
Command 'cat /etc/cmcluster/cmclfiles2check | /usr/sbin/cmcompare -W -v -n vm04-2 -n vm06_01' exited with status 2
WARNING: Unable to check consistency of all files listed in /etc/cmcluster/cmclfiles2check
Maximum configured packages parameter is 300.
Verified 0 new packages.
Total number of packages configured in the cluster is 0.
Creating the cluster configuration for cluster vm06_01_cluster
Adding node vm04-2 to cluster vm06_01_cluster
Adding node vm06_01 to cluster vm06_01_cluster
cmcheckconf: Verification completed. No errors found.
Use the cmapplyconf command to apply the configuration.
[root@vm06_01 : /etc/cmcluster]# vgchange -a y vglock
Activated volume group.
Volume group "vglock" has been successfully changed.
[root@vm06_01 : /etc/cmcluster]# cmapplyconf -v -C cmclconfig.ascii
Begin cluster verification...
Checking cluster file: cmclconfig.ascii
MAX_CONFIGURED_PACKAGES configured to 300.
check_cdsf_group, no cdsf group specified.
Checking nodes ... Done
Checking existing configuration ... Done
MAX_CONFIGURED_PACKAGES configured to 300.
Gathering storage information
Found 4 devices on node vm04-2
Found 7 devices on node vm06_01
Analysis of 11 devices should take approximately 2 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Found 3 volume groups on node vm04-2
Found 5 volume groups on node vm06_01
Analysis of 8 volume groups should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Gathering network information
Beginning network probing (this may take a while)
Completed network probing
Begin file consistency checking
WARNING: /etc/hosts is different across nodes vm04-2 vm06_01
/etc/cmcluster/cmclfiles2check is the same across nodes vm04-2 vm06_01
/etc/hosts has different content on nodes vm06_01, than on nodes vm04-2
/etc/hosts has timestamp "Sep 20 15:36" on nodes vm06_01, "Sep 9 17:42" on nodes vm04-2
WARNING: /etc/nsswitch.conf permissions could not be checked on nodes vm04-2 vm06_01

WARNING: /etc/nsswitch.conf owner could not be checked on nodes vm04-2 vm06_01

WARNING: /etc/nsswitch.conf checksum could not be checked on nodes vm04-2 vm06_01

/etc/nsswitch.conf is the same across nodes vm04-2 vm06_01
/etc/services is the same across nodes vm04-2 vm06_01
/etc/cmcluster/cmignoretypes.conf is the same across nodes vm04-2 vm06_01
/etc/cmcluster/cmknowncmds is the same across nodes vm04-2 vm06_01
/etc/cmcluster/cmnotdisk.conf is the same across nodes vm04-2 vm06_01
Command 'cat /etc/cmcluster/cmclfiles2check | /usr/sbin/cmcompare -W -v -n vm04-2 -n vm06_01' exited with status 2
WARNING: Unable to check consistency of all files listed in /etc/cmcluster/cmclfiles2check
Maximum configured packages parameter is 300.
Configured 0 new packages.
Total number of packages configured in the cluster is 0.
Creating the cluster configuration for cluster vm06_01_cluster
Adding node vm04-2 to cluster vm06_01_cluster
Adding node vm06_01 to cluster vm06_01_cluster
Marking/unmarking volume groups for use in the cluster
Completed the cluster creation