1748232 Members
3430 Online
108759 Solutions
New Discussion юеВ

Re: pidentd need package

 
mas1
Advisor

pidentd need package

Hi
I want install serviceguard on Dl380g4 and with SUSE enterprise 10.
I need pidentd package for this install and i do not have this package.
Please help
thanks , Regard
11 REPLIES 11
Matti_Kurkela
Honored Contributor

Re: pidentd need package

The pidentd package is available on the ServiceGuard installation media.

The Release Notes document of your ServiceGuard version has a detailed installation procedure. Please read it.

MK
MK
skt_skt
Honored Contributor

Re: pidentd need package

which version r u looking for ?
Serviceguard for Linux
Honored Contributor

Re: pidentd need package

Pidentd is not needed for SLES10.

Please recheck the docs.
Serviceguard for Linux
Honored Contributor

Re: pidentd need package

I should clarify. The version of pidentd that is part of the SLES10 distribution is used.

What I meant was there was no special version delivered by HP for this.

Sorry for the confusion
mas1
Advisor

Re: pidentd need package

Hi my friend
If when i install serviceguard-A.11.16.08-0.product.suse.i386.rpm package on suse 10 dependency error from pident package recive from system
Please help me
thanks
Serviceguard for Linux
Honored Contributor

Re: pidentd need package

Install pidentd from the SUSE enterprise 10 CD. I cannot easily look up which CD this would be on.
mas1
Advisor

Re: pidentd need package

Hi friend
Thanks for all answers for my question.
I search all medias SUSE 10 but i do not find Pident package on this.
If you know from site i can download this package, please you get that link.
Thanks Regard
Serviceguard for Linux
Honored Contributor

Re: pidentd need package

I can't check this until tomorrow my time.

I assume that you did check with

# rpm -qa | fgrep pidentd

Also, when you started the Serviceguard install, what error message did you get?
Ulf Jackisch
New Member

Re: pidentd need package

Hello,
I try the same but when I try to install the rpm I got the following message :

node2:/tmp/install/ewg/serviceguard11.16/sources/SLES10/rpms # rpm -i serviceguard-A.11.16.08-0.product.suse.i386.rpm
It appears that an incorrect version of pidentd is loaded
For this version of Linux the version of pidentd should be:
3.1a27sg.
Check the Release Notes for the location of the pidentd rpm
file that is required here.
error: %pre(serviceguard-A.11.16.08-0.i386) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping serviceguard-A.11.16.08-0
node2:/tmp/install/ewg/serviceguard11.16/sources/SLES10/rpms # rpm -qa | grep pident
pidentd-3.1a25-199.2

The pident is the version which are coming with SLES10SP1, where can I get the necassary version or what must I do to solve the problem ?