Hello,
I would like to ask if somebody did experience during building of sglx 11.20.10 cluster on Rhel 6.3 during cmcheckconf error messages like :
[root@node1 ~]# cmcheckconf -v -C cluster.conf
Begin cluster verification...
Checking cluster file: cluster.conf.
MAX_CONFIGURED_PACKAGES configured to 10.
Checking nodes ... Done
Checking existing configuration ... Done
MAX_CONFIGURED_PACKAGES configured to 10.
Gathering storage information
Found 1 devices on node node1
Found 1 devices on node node2
Analysis of 2 devices should take approximately 1 seconds
0%----10%----20%----30%----40%----50%----60%----70%----80%----90%----100%
Gathering network information
Beginning network probing (this may take a while)
Completed network probing
Network interface bond2 on node node1 couldn't talk to itself.
Network interface bond3 on node node1 couldn't talk to itself.
Network interface bond2 on node node2 couldn't talk to itself.
Network interface bond3 on node node2 couldn't talk to itself.
cmcheckconf: Unable to reconcile configuration file cluster.conf
with discovered configuration information.
and what is the solution to fixing/workarounding the issue.
The interfaces have full connectivity and name resolution is setup according to guide.
thanks
