Looking for Comware OpenFlow documentation.

[Anonymous]

Hello,

the A5500 Comware switch got OpenFlow support. However I can't find any documentation on the topic. I'm looking for documentation that describes how to configure it and which fields can be matched in hardware, how many flows can be installed in hardware and if it supports IPv6. Anyone?

Cheers,

        Thomas

[MichaelM55]

There´s an openflow configuration guide for 5900 series, but no information about hardware support of openflow.

[Sukar]

Hello Thomas / Michael,

An engineer has been assigned to research on your query.  We have reached out to the team internally who can provide answers to your query. Will keep you posted as soon as we hear from them . Apologizes for the delay here. 

Thanks

Sukar

[LeoJH3]

Hi Thomas,

Sorry for the delay.  Here's some info regarding your question:

Number of flows for 5500 is 3k for 24-port and 6k for 48-port.  L2/L3 table can also be used as the extension. It is 32k MAC and 8k or 16k ARP. 

If your question is answered please close this thread, otherwise let us know and we will be glad to assist you further.

Thanks,

Leo

[MichaelM55]

---

@LeoJH3 wrote:

Number of flows for 5500 is 3k for 24-port and 6k for 48-port.  L2/L3 table can also be used as the extension. It is 32k MAC and 8k or 16k ARP. 

---

Is this for A5500-EI or A5500-Hi?

[sdnindia]

Hello MichaelM55,

This is for 5500hi but arp is 16k, not 8k .

Thanks

HP SDN Team

[sdnindia]

Hello MichaelM55,

Doing a follow up to check if you need any further assistance with respect to the query posted.
Please do let us know  if your problem is solved.

If you have more questions on the same topic please do reply on the same thread or open a new post if new topic.

Thanks
HP SDN Team