Networking
Find answers to your questions about Networking.
Software Defined Networking
Showing results for 
Search instead for 
Do you mean 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Software Defined Networking
Posted to:
Original author:
Through testing, I have found that LLDP packets traverse links between two HP devices untagged. This has raised some questions, so let me present a scenario. Consider two switches A and B connected by a link (say between port 1 on both switches). Let...
Posted to:
Original author:
We are trying to add a flow that outputs to controller and to a physical port but we are getting a BAD_ACTION/BAD_TYPE error back from the switch (3800 - Sw: KA.16.02.0012) regardless of the order in which we specify the actions. Here's part of the O...
Posted to:
Original author:
Hi, I'd like to know how to create a Multipart Request message of type Aggregate (OF 1.3 spec page 64). In particular, I want to aggregate the statistics of flows that match on cookie and a cookie mask. I can see a lot of classes implementing the int...
Posted to:
Original author:
We are trying to add a flow that outputs to controller and to a physical port but we are getting a BAD_ACTION/BAD_TYPE error back from the switch (3800 - Sw: KA.16.02.0012) regardless of the order in which we specify the actions. Here's part of the O...
Posted to:
Original author:
I have HP3800 switches configured as OpenLFow 1.3 SDN switches (firmware version KA.15.15.0006). In OpenFlow SDN mode, If the switches reveive mutlicast packets, they broadcast the packets as per a traditional switch, without the SDN controller addin...
Posted to:
Original author:
We are wanting to keep track of interface VLANs in VAN. Our HP switches send out IEEE 802.1 Port VLAN Ids over LLDP, and we are able to capture and read these packets from within VAN with a SequencedPacketListener. It seems like VAN should automatica...
Posted to:
Original author:
The Certifacte signing requirements for a large portion of browsers has recentaly changed, and because of this the orignal self signed version for the SDN Controller conflicts with these browsers minimum requirements. Here is the procedure for manual...
Posted to:
Original author:
The json schema for all REST API commands is available via RSDoc. Enter the following URL to access the json information. Be sure the controller is running. https://<controller_IP>:8443/sdn/v2.0/models Replace <controller_IP> with the IP...
Posted to:
Original author:
I don't know details about healthmonitor app, so I'll try to asnwer you in a generic way. For instance, we generated app using gen-sdn-app --app myapp --company mycompany --subject MySubj --rest-path turbosubject ... The default path to access MySubj...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot ThreadHot Thread
  • Replied-to Thread Replied-to Thread
  • Read Only ThreadRead Only Thread
Events
Each Month in 2016
Online
Software Expert Days - 2016
Join us online to talk directly with our Software experts during online Expert Days. Find information here about past, current, and upcoming Expert Da...
Read more
Sep 30
Seattle, WA
OpenStack Days Seattle
OpenStack Days Seattle, September 30, is the largest gathering of OpenStack users and prospective users in the Pacific Northwest region.
Read more
View all
Top Authors
Occasional Advisor
1
View all