HPE Community
MSA Storage
1752795 Members
5862 Online
108789 Solutions
New Discussion

Re: MSA 1040 10GbE with 1GbE GBIC?

 
SOLVED
Go to solution
Phix
Occasional Contributor

‎07-28-2015 09:29 AM

‎07-28-2015 09:29 AM

MSA 1040 10GbE with 1GbE GBIC?

Hi Forum,

 

can I connect the MSA 1040 with dual 10 GbE iSCSI Controllers via a DAC or MiniGBIC (normal 1Gig version) to 1 Gigabit Port of the switch?

To be future proof we are planing to buy the 10GbE version but our switches are still 1GbE ;-)

 

Thanks in advance!

0 Kudos
Reply
2 REPLIES 2
AnkitM
Trusted Contributor

‎07-29-2015 03:22 AM

‎07-29-2015 03:22 AM

Solution

Re: MSA 1040 10GbE with 1GbE GBIC?

Direct attached copper cables are supported in 10GbE Controller systems . However, it is not a Supported Configuration. (i.e. It will work at 1GbE and if you face issues with Host Connectivity or Performance related issues etc. you will need to change test it with 10GbE to request Support)

 

Supported Configuration for 10GbE can be found: http://www8.hp.com/h20195/v2/GetPDF.aspx/c04227623.pdf Page 27

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award KUDOS! to the person providing the answer. This helps others searching for a similar issue.
Reply
CalvinZito
HPE Blogger

‎07-29-2015 09:54 AM

‎07-29-2015 09:54 AM

Re: MSA 1040 10GbE with 1GbE GBIC?

Hi Phix - AnkitM is an MSA expert so his word is gold.  

 

Are you already working with an HP rep or channel partner? I'm happy to help in any way. 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.