Restore the default settings HP 8/8 Base SAN Switch

[Caraganda]

yes i did "switchdisable".

But I can show the log tomorrow.

[Caraganda]

FCSWA5:admin> configremove -all
configremove: unrecognized option `-all'
configremove Usage:
configremove [options] [<filename>]
Options:
-h Help. Prints this help information.
-local Remove config file previously created by configUpload -local <filename>
-USB Remove config file previously created by configUpload -USB <filename>
-U Same as -U above.
Run the command without <filename> for interactive mode.

FCSWA5:admin> configremove -local
File Name [config.txt]:

configremove: File config.txt not found
FCSWA5:admin> configremove -U

configremove: USB device either not present or not enabled
FCSWA5:admin> configlist

configlist: -local or -USB required
FCSWA5:admin> configlist -local
config,.txt 13522 2014 Jan 22 12:54
FCSWA5:admin> configremove -local config,.txt
2014/01/22-15:09:16, [CONF-1032], 618078, FID 128, INFO, FCSWA5, configRemove c ompleted successfully local file.
Removed the file config,.txt.
FCSWA5:admin> configlist -local
No files found
FCSWA5:admin> configdefault -all
Executing configdefault...Please wait
setting the default config on switch FCSWA5
Already in Native Mode continuing with configDefault
Committing configuration ... done.
The switch has to be rebooted to allow the changes to take effect.
Do you want to reboot the system (y/n) [y]: y
2014/01/22-15:09:45, [CONF-1031], 618079, FID 128, INFO, FCSWA5, configDefault completed successfully for all.
2014/01/22-15:09:46, [RAS-1007], 618080, CHASSIS, INFO, Brocade300, System is a bout to reboot.
Restarting system.

[Caraganda]

tried everything. nothing helped