HPE Community
MSA Storage
1753521 Members
4890 Online
108795 Solutions
New Discussion

Serial Number on MSAP2000 G3

 
_richard
New Member

‎01-26-2017 07:21 AM

‎01-26-2017 07:21 AM

Serial Number on MSAP2000 G3

I need to get the serial number off the unit, however it appears that its on top of the chassis?  Is there any other way to obtain the serial?  Seems very inconvinient to have to unrack the unit to get the serial.  Also, I cannot log in via SSH, due to a faulty controller I believe, which is what has prompted me to get support.

 

Any help appreciated!

Richard

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎01-30-2017 05:36 AM - edited ‎01-30-2017 05:39 AM

‎01-30-2017 05:36 AM - edited ‎01-30-2017 05:39 AM

Re: Serial Number on MSAP2000 G3

If the system is running, you can ssh/telnet to and run

show enclosure-status

this will show the chassis serial within the first lines.

IIRC the serial is on a sticker near the slots of the power supplies - very small.

 

 

P2000.png


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.