Upgrading EVA4400 firmware & CommandView version

[Yaboto]

Hi,

Currently I have Command View version 9.01 and EVA controller firmware version 09534000. I want to upgrade them to the latest compatible versions possible.

Please advise.

Yaboto

[Amar_Joshi]

Hello Yaboto,

Latest firmware (XCS) for EVA4400 is 10100000 and avaialble at:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63147

To install this firmware you need to go to Command View v10.0 first. It's available at :

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10

If you need to find yourself next new releases, please go to http://software.hp.com and search for key words there.

Hope that helps.

[Johan Guldmyr]

After you've downloaded the softwares you should read the HP P6000 EVA Updating Product Software Guide,

you can find it here

[SUBHAJIT KHANBARMAN_1]

I am surprised that you are running with CV EVA 9.01 along with XCS09534000 which is not supported. XCS0953x000 supports from CV EVA 9.1. Attached is the old Compatibility guide for your reference.

The upgrade path for CV EVA in your case,

9.0.1 -> 9.1

9.1 -> 9.2

9.2-> 10.0

In order to avoid all the above you need to uninstall CV EVA 9.0.1, reboot the server and go for the fresh installation of CV EVA 10 from the below link,

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=P6000_CV10

XCS10100000 firmware download link,

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63147

XCS10100000 release notes download link,

http://h10032.www1.hp.com/ctg/Manual/c03284897.pdf

XCS10100000 firmware upgrade guide download link,

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02858292/c02858292.pdf

All other details related to XCS upgrade you can find in the following customer advisory,

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03287750&jumpid=em_alerts_us-us_Apr12_xbu_all_all_1702180_112092_storagesoftware_critical_006_1

It is recommended that HP Command View 10.0 is used to manage the HP Enterprise Virtual Array with controller software XCS 10100000. So please find the following advisory which will help you to understand better,

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3664763&prodTypeId=12169&objectID=c03078148

Please find the link to get latest Compatibility guide,

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02523047/c02523047.pdf

[Raymond E. Lilly]

Does anyone know where to find the 9.1 -> 9.2 upgrade package?

[Johan Guldmyr]

I believe you need to call hp to get it.

[SUBHAJIT KHANBARMAN_1]

I am not sure why you are looking for CV EVA 9.2.........I would suggest to go for the complete uninstallation of old CV EVA and go for the latest CV EVA10........because it is always good to run your EVA with latest XCS and to run with latest management software as well.

CV EVA 9.2 not available in public sites. You need to contact hp.

[Torsten.]

The latest firmware XCS 10100000 works only with command view 10 or later, cv version 9.2 supports xcs up to version XCS 0953x000.

So you need

XCS 10100000

and

command view 10.

Uninstall the old CV version and install the new version.

[Domenic_Alvaro]

I want to upgrade from 09534000 to 10100000 with array-based management.  I can't find any information about which management controller firmware I need, or where to find it.

Management module firmware is currently mmp-0001.4000-CR05B2.  Do I need to update this?  If so, where do I get the latest version?

Thanks,

Domenic

[Johan Guldmyr]

Hi, 

management module firmware is included in the CV .iso. 

When you upgrade CV on the management module it should upgrade the mm firmware as well.