Cable and switch for eva4400

[uxbeginner22]

I'm a little confused about EVA4400 cabling.

If i buy a switch like this

Wich cable i need?FC/FC?

I want to connect to HSV300 controller and to this  hb adapter

I'm a little confused about cables.

SFP?FC/FC?

This will work?

http://www.ebay.it/itm/2M-FC-FC-Duplex-10-Gigabit-50-125-Multimode-Fiber-Optic-Cable-OM3-Aqua-10GB-/281572729016?hash=item418f0ae0b8:g:djYAAOSwu4BV5hg6

Thanks

[giladzzz]

hi

I think you IBM is 1GB output so you would need LC - SC cable

some thing like this

http://www.ebay.com/itm/2m-LC-SC-Duplex-50-125-Multimode-2-Gb-Fiber-Patch-Cable-Aqua-om3-/161857149143?hash=item25af7018d7:g:UAMAAOSwwbdWHXQs

the connector should be the same

Regards

if you like give a Kudo

[uxbeginner22]

I still not buy the ibm switch,is only an idea.

Can you suggest me please something with more speed or do you think 1GB is sufficient for SAN

testing?

[giladzzz]

Hi

your HSV300 is 4GB and your HBA from the picture is 2GB or 4GB 

you need at least a 2GB switch some thing like this

http://www.ebay.com/itm/IBM-Brocade-3534-F08-8-Port-2GB-Fiber-Fibre-Channel-SAN-Network-Switch-18P4393-/201174102084?hash=item2ed6e93044:g:AfYAAOSwRLZUGwND

you would need an SFP for it something like this for each port you use

http://www.ebay.com/itm/IBM-53P1223-2GB-850MM-SFP-Optical-Tranceiver-/281125563225?hash=item417463ab59:g:MIAAAOxyMxpRxdHr

you shuold check the model according to the switch you buy

and you would need cables like this OM2 (orange) or OM3 (light blue) grade would be could OK

http://www.ebay.com/itm/LC-LC-3M-DUPLEX-10-GIGABIT-50-125-MULTIMODE-FIBER-OPTIC-CABLE-OM3-/200939531337?hash=item2ec8edec49:m:mYzfH6fS6mwnuH9BKiVwZLw

Regards

[uxbeginner22]

Perfect thanks