HPE EVA Storage
1748123 Members
3366 Online
108758 Solutions
New Discussion

Upgrade EVA 4400 & Management Module Firmware

 
SOLVED
Go to solution
Lincker
Occasional Contributor

Upgrade EVA 4400 & Management Module Firmware

When I'll upgrade XCS on array EVA 4400, does the management module's firmware & Command View will also updated or these components need update separate?

 

Thanks!

 

 

P.S. This thread has been moevd from General to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator

2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: Upgrade EVA 4400 & Management Module Firmware

This is an separate update.

If you download command view from software.hp.com, you will find of course CV inside, but also an ABM.pkg file.

This file is for the management module, it contains the firmware and command view for the module. Connect to the module (via browser) and select this file to be used for update.

 

 

 

 

ALWAYS read the update manual and release notes before updating anything!!!


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Prakash Singh_1
HPE Pro

You can get the steps and detailed links at the HP Guided...

You can get the steps and detailed links at the HP Guided troubleshooting .

 

http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=12169&prodSeriesId=3664763&lang=en&cc=us

 

Regards

 

Prakash

Regards,

PS
To assign points on this post? Click the white Thumbs up below!