HPE EVA Storage
1748205 Members
4596 Online
108759 Solutions
New Discussion

Upgrade command view license

 
ashkan_tab2003
Occasional Advisor

Upgrade command view license

We have eva3000 with CV3.1.

We want upgrade HSV100 firmware controller from VCS 3 to VCS 4 (active -active) version.

i know that cv3.1 can not detect eva3000 with vcs 4 .

Therefore we need upgrade CV.

can i use old license or i need buy new license for newer CV(for example CV4)?

Thanks for your kind and quick response.
Regards
ASHKAN

 

 

P.S. This thread has been moevd from Community Feedback & Suggestions to Storage Area Networks (SAN) (Enterprise) - Hp forum Moderator

1 REPLY 1
giladzzz
Honored Contributor

Re: Upgrade command view license

Hi

untill command view version 7 there is no need  for command view license on the EVA so as long as you stay in a version under 7 there is no problem. if you also have other license like BC you will need an upgarde license.

Regards