Storage Area Networks (SAN)
cancel
Showing results for 
Search instead for 
Did you mean: 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
Hi, Is there any configurable parameter in scli which can avoid a rescan of devices when there is connection failure between the server and Storage array? The storage array is an XP array and the server has the Qlogic FC card. Thanks
Posted to:
Original author:
I have a question for this community/discussion board. What do you think if we reaname this discussion board from "Storage Area Networks (SAN) - Small and Medium Business" to " MSA Storage "? Any other suggestions for another name...
Posted to:
Original author:
HI, could anyone help me , i need to replace our power supply for SN3000B 16GB FC Switch, i got two Power supply's Part Number 492295-001 and the other is 492295-002, could someone help, which Part number should i order? are they same part? Thanks in...
Posted to:
Original author:
Hello, Is it possible to change the https certificate to a custom certiticate that I created my self? I have a local CA in my domain which I sing certificates with and I wanted to generate a valid certificate for my MSA 2040 so I don't get the warnin...
Posted to:
Original author:
Hi, to be sure, are this cables correct to connect a MSA2040 SAS controller to a HBA H241? HP External 1.0m (3ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable 716195-B21 HP External 2.0m (6ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable 716197-B21 HP External 4...
Posted to:
Original author:
Hi, I'm setting up my first MSA 2042. I wanted to activate the auto tiering capabilities. I have already activated the license. I am following the white papers ... I created the first virtual pool in RAID6 with 12 600GB SAS disks, then I created a se...
Posted to:
Original author:
here is the latest link to CV10.3 patches 10.3.1 - 10.3.7 http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=5158106&swLangOid=8&swEnvOid=4064
Posted to:
Original author:
How the hell is that self explanatory? "HP has recently discovered an issue" Nowhere in the advisory does it say what the issue is. I have a customer who purchased this configuration while it was supported. I am looking for more information...
Posted to:
Original author:
Hi Wolfgang: have you tried these (Found in Installation Manual, troubleshooting section, Page 58): Title: Insufficient privileges prevents login The following error message may display during setup: Insufficient privileges Execute the following comm...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Events
June 6 - 8, 2017
Las Vegas, Nevada
Discover 2017 Las Vegas
Join us for HPE Discover 2017 in Las Vegas. The event will be held at the Venetian | Palazzo from June 6-8, 2017.
Read more
Each Month in 2017
Online
Software Expert Days - 2017
Join us online to talk directly with our Software experts during online Expert Days. Find information here about past, current, and upcoming Expert Da...
Read more
View all
Top Authors
Acclaimed Contributor
4323
Esteemed Contributor
47
Visitor
2
View all