ql2300 error and cluster hangson that node

[binoyskylark]

Hi team i am getting following error and my cluster node getting hangs because of this , here we are using windows 2003 cluster with latest service pack SP2

find the attached log

Event Type: Warning
Event Source: ql2300
Event Category: None
Event ID: 129
Date: 2/20/2008
Time: 2:45:35 PM
User: N/A
Computer: SDATASERVER
Description:
Reset to device, \Device\RaidPort0, was issued.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 0010000f 00660001 00000000 80040081
0010: 00000004 00000000 00000000 00000000
0020: 00000000 00000000 00000000 00000000
0030: 00020100 80040081

[Nick Busick]

Are you using PolyServe?

[binoyskylark]

no polyserve implemented its normal microsoft sql cluster ,,, i am getting this error in lots of place .i contacted hp support also, but solution not yet provided

[Rob Leadbeater]

Hi,

What storage system are you connecting to ?
Can you see any problems on that ?

Cheers,

Rob

[binoyskylark]

eva 4100 with all recommended patchlevel ,,,i am using sql cluster some time sqlcluster disks fails with this error ,,,i dont why its coming and hp support team also not solved that

[IBaltay]

Hi,
I am sending you 2 notes to this issue
1. MPIO is using the SCSI-3 commands and the MSCS uses SCSI-2 commands. There is a patch to that. But it is probable it was included in the SP2. (http://support.microsoft.com/kb/911030/en-us)

2. the cause of the SCSI resets can be any other HW (library) or software like Storage essentials, etc. If it is the library, you can add it to the zone separately and if its the Storage essentials, it has to patched

[binoyskylark]

Hi

its in windows 2003 sp2 , library is there but its already in a zone me uploading my supportshow also

[binoyskylark]

without library also we got this issues, not in one place , lots of place i can see this errors , we really stucked up kindly help

[IBaltay]

Hi,
one other thing is that if you have the EVA 4100 firmware 6100/6110, pls go to the SPOCK http://spock.corp.hp.com/streams/index.aspx?ArrayID=40
and check if you are ok in all the SAN related drivers and BIOS (firmware, driver, MPIO, diskIO timeout) values.

[kris rombauts]

That's a internal HP website, for customers, use the external accessible SAN design guide:


http://h18006.www1.hp.com/products/storageworks/san/index.html?jumpid=reg_R1002_USEN

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=101&prodTypeId=12169&prodSeriesId=406734


Kris