Showing results for 
Search instead for 
Do you mean 

EMC SMI-S

SOLVED
Go to Solution
Frequent Advisor

EMC SMI-S

[ Edited ]

Hi All,

We have installed an solution enabler for EMC storage (SMI-s) and tring to add the symmetrix VMX device using array as well as with IP address,i am getting the error the following error. someone please guide.

 

(localhost:5988) ? addsys
Add System {y|n} [n]: y

ArrayType (1=Clar, 2=Symm) [1]: 2
One or more IP address or Hostname or Array ID

Elements for Addresses
IP address or hostname or array id 0 (blank to quit): ***************
IP address or hostname or array id 1 (blank to quit):
Address types corresponding to addresses specified above.
(1=URL, 2=IP/Nodename, 3=Array ID)
Address Type (0) [default=2]: 3
User [null]: rouser
Password [null]: r0u$er
++++ EMCAddSystem ++++
Error: One or more parameter values passed to the method are not valid. (com.emc.cmp.osls.se.array.func.EMC_SystemRegistr
nService.EMCAddSystem():169 C:ERROR_CLASS_SOFTWARE F:ERROR_FAMILY_INVALID_PARAMETER Invalid address type)

Thanks

 

2 REPLIES
HPE Expert

Re: EMC SMI-S

Hello Connection,

At first, it appeared that you chose a wrong option when filling out the information.  It looked like you were asking about adding a VNX array instead of a VMAX (SYMM).

We have a document that steps through the process for adding both VMAX and VNX/CLARiiON arrays to the EMC SMI-S.

KM01862791 - SMI-S Provider Configuration to discover EMC Arrays in HP Storage Essentials and HP Storage Operations Manager 
https://softwaresupport.hpe.com/km/KM01862791

If you continue to encounter errors after following the document and making sure that the VMAX has a GateKeeper LUN presented to the SMI-S host, then you may need to work with EMC to troubleshoot the error.

I hope that this is helpful.

Regards,

Mark

---
Mark Butler
HPE SW Support Engineer
https://softwaresupport.hpe.com/
Frequent Advisor

Re: EMC SMI-S

Thanks Mark,

 

This is helping a lot, we will check and update you.