Storage Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

Hewlett Packard Enterprise Community

Join the conversation with experts and colleagues to get advice, discuss issues, and find solutions
Posted to:
Original author:
Hallo, is there document describing the HPE StoreFabric SN6000B Fibre Channel Switch command line interface? I did find a link to the HP SN6000 Fibre Channel Switch Command Line Interface Guide. However, the commands listed in there do not correspond...
Posted to:
Original author:
Hello Members, I would like to know the process for upgrading cascaded san switches. We have two fabric each with two members. Switches are connected with ISL links & have trunk licenses. I need to know the below. 1. Do i need to upgrade the subo...
Posted to:
Original author:
hi comunity, i loggin in the SW SAN whith the Active Directory User.. but when i try to change the VF the SW show my the fallowing messeg: FID128:User_Prueba> setcontext 3 VF Permission for fid 3 is denied is necesary add any permission in the SW...
Posted to:
Original author:
Hello Members, I would like to know the process for upgrading cascaded san switches. We have two fabric each with two members. Switches are connected with ISL links & have trunk licenses. I need to know the below. 1. Do i need to upgrade the subo...
Posted to:
Original author:
Hey Guys, i got a big problem and hope that you can help me. I have an old B300 Switch (HPE-labled/ without contract) and I reseted them to factory defaults. I googled and found the command "configremovall". According to the website, the sw...
Posted to:
Original author:
Dear colleauges, we are currently running two redundant fabrics and each fabric consists of three StorageWorks 8/8 switches that we already have upgraded to Fabric OS v7.4.2c. We now would like to add one HP SN6000B switch to each fabric that we have...
Posted to:
Original author:
Hi Ilypat, I see that you have two Brocade switches in one fabric and two in second fabric and want to perform firmware update on the switches. As a best practice, perform upgrade on principal switch first and then the other one in first fabric. Once...
Posted to:
Original author:
Hi francisco82, I see that you are trying to login as active directory user on switch with Virtual Fabric enabled and while login to one of the VF, you are getting an error VF Permission for fid is denied. This happens when the admin privilege was no...
Posted to:
Original author:
Hi If your new switch has a different domain ID and no zoning configuration. it will connect to the existing fabric and load the fabric zoning configuration. it is good to open CLI connection to see "switchshow" or "fabricshow" fo...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Events
June 18 - 20
Las Vegas, NV
HPE Discover 2019 Las Vegas
Learn about all things Discover 2019 in  Las Vegas, Nevada, June 18-20, 2019
Read more
Read for dates
HPE at 2019 Technology Events
Learn about the technology events where Hewlett Packard Enterprise will have a presence in 2019.
Read more
View all
Top Authors
HPE Pro
2 Kudos

11 Posts

View all