Storage Software
cancel
Showing results for 
Search instead for 
Did you mean: 

Has anyone encountered / solve this SSSU error..?

RTMJ
Advisor

Has anyone encountered / solve this SSSU error..?

Error: EMClientAPITNG error ->
EMCLIENTAPI_INVALIDSERVERRESPONSE_ERROR : The response sent by the server is invalid.

It doesn't look like a username or password issue. I've confirmed the IP address of the management server is correct.

Appreciate assistance...thank you in advance!

NoSystemSelected> ! Fill in the name of the SANAppliance and change the username/password to the actual settings

NoSystemSelected> SELECT MANAGER 145.26.119.138 USERNAME=administrator PASSWORD=administrator

NoSystemSelected> SHOW CELL

Error: EMClientAPITNG error ->
EMCLIENTAPI_INVALIDSERVERRESPONSE_ERROR : The response sent by the server is invalid.

NoSystemSelected> !

NoSystemSelected> ! Just a show cell to see what's out there.

NoSystemSelected> SELECT CELL ra40

Error: EMClientAPITNG error ->
EMCLIENTAPI_INVALIDSERVERRESPONSE_ERROR : The response sent by the server is invalid.

NoSystemSelected> !

NoSystemSelected> ! get status of the Cell, capacity, date

NoSystemSelected> SHOW CELL FULL

 

P.S. This thread has been moved from  Disk Array to HP Storage System Scripting Utility (SSSU). -HP Forum Moderator

2 REPLIES
Uwe Zessin
Honored Contributor

Re: Has anyone encountered / solve this SSSU error..?

RTMJ,
have you checked if the versions of Command View EVA and SSSU do match? You cannot combine arbitrary versions.
.
RTMJ
Advisor

Re: Has anyone encountered / solve this SSSU error..?

commandview eva 4.1.2.2
sssu came from the same installation package as the commandview eva.

Was able to run SSSU 3 months ago, as recorded in the last report date.

Firmware on eva is 3028.