Storage Software
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP increasing handles to 100000 when polyserve installed and not running

Ian Jones3
Occasional Visitor

SNMP increasing handles to 100000 when polyserve installed and not running

We have polyserve installed on a windows 2003 r2 64bit Enterprise server with SP2. When polyserve is running the SNMP works correctly, but when Polyserve is not running the SNMP handle count goes through the roof.
Anyone else seen this?
2 REPLIES
Emil Velez
Honored Contributor

Re: SNMP increasing handles to 100000 when polyserve installed and not running

Yes the mib becomes invalid..

Since this is windows do you have 3.6.1 which has the perfmon counters and the new performance dashboard.
Dan Tyndale
Advisor

Re: SNMP increasing handles to 100000 when polyserve installed and not running

Recommend, if your not, running 3.6.1 HF2. There are fixes in there you need. I count 3 SNMP fixes included plus many other known issue resolutions.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=3435148&swItem=co-74028-1&prodNameId=3435149&swEnvOID=1060&swLang=13&taskId=135&mode=4&idx=0

www.hp.com, Support and Drivers, PolyServe (case sensitive), OS, etc to view all.