SSSU "capture configuration" halts with an error!

[Matthias Rettl]

Hy there!

anyone knows this issue: i try to CAPTURE CONFIGURATION in my SSSU and it halts with an error:

!
! CAPTURE CONFIGURATION Step1A on Tue Jun 21 09:29:39 2005
!
! Manager: 172.21.44.240:12301
! System: SanLabEVA
!
! SSSU Build 7 for EVA Version 3.2
!
SET OPTIONS ON_ERROR=HALT_ON_ERROR
ADD SYSTEM "SanLabEVA" DEVICE_COUNT=8 SPARE_POLICY=SINGLE DISKGROUP_DISKTYPE=ONLINE CONSOLE_LUN_ID=0
SELECT SYSTEM "SanLabEVA"
SET DISK_GROUP "\Disk Groups\Default Disk Group" OCCUPANCY_ALARM=95
ADD FOLDER "\Virtual Disks\AIX"
ADD FOLDER "\Virtual Disks\Solaris"
ADD FOLDER "\Virtual Disks\Vmware"
ADD FOLDER "\Virtual Disks\Windows"
ADD HOST "\Hosts\AIX" OPERATING_SYSTEM=IBMAIX WORLD_WIDE_NAME=1000-0000-C93E-9BC4
SET HOST "\Hosts\AIX" ADD_WORLD_WIDE_NAME=1000-0000-C93E-9A5B
ADD HOST "\Hosts\ESX" OPERATING_SYSTEM=WINDOWS WORLD_WIDE_NAME=2100-00E0-8B1B-7A78
SET HOST "\Hosts\ESX" ADD_WORLD_WIDE_NAME=2100-00E0-8B1B-5F78
SET HOST "\Hosts\ESX" ADD_WORLD_WIDE_NAME=2100-00E0-8B1B-6B78
SET HOST "\Hosts\ESX" ADD_WORLD_WIDE_NAME=2100-00E0-8B1A-A10E
ADD HOST "\Hosts\LC2000" OPERATING_SYSTEM=UNKNOWN WORLD_WIDE_NAME=2100-00E0-8B12-CAAC
ADD HOST "\Hosts\SMA" OPERATING_SYSTEM=WINDOWS WORLD_WIDE_NAME=1000-0000-C93B-28F9
SET HOST "\Hosts\SMA" ADD_WORLD_WIDE_NAME=1000-0000-C93B-28FA
ADD HOST "\Hosts\Vectra01" OPERATING_SYSTEM=WINDOWS WORLD_WIDE_NAME=2100-00E0-8B11-45BC
SET HOST "\Hosts\Vectra01" ADD_WORLD_WIDE_NAME=2100-00E0-8B12-FE4E
ADD HOST "\Hosts\e250" OPERATING_SYSTEM=SOLARIS WORLD_WIDE_NAME=2100-00E0-8B1A-EB7F COMMENT="test"
ADD HOST "\Hosts\v240" OPERATING_SYSTEM=WINDOWS WORLD_WIDE_NAME=2100-00E0-8B1A-8E8C COMMENT="test"
ADD HOST "\Hosts\x440" OPERATING_SYSTEM=WINDOWS WORLD_WIDE_NAME=2100-00E0-8B12-29B6

Error: Required token "Write_cache_Policy" not found
CAPTURE CONFIGURATION Step1A failed



does anyone have an idea?
kind regards,
matthias

[Matthias Rettl]

Self-Solved :)

SSSU Version was for Command View 3.x! That one is different to SSSU for Command View 4.x!!

I installed the Platform Kit 3.0F for Windows... but that contains the OLD SSSU!!
Take the new one (from the Command View EVA 4.x source) - that works!

Regards,
Matthias

[Matthias Rettl]

:)

[WilliamSmith11]

Mathias I am getting the same problem
I have Command view 4.0 and sssu 3.2

May you give send me the link from where you download the Platform 3.f?

[Farid Abizeid]

Hi,

I faced this problem earlier with CV4.1 and VCS3.025

The problem was solved by rolling back to CV3.3 (which is OK with VCS 3.025)

Later on after upgrading to VCS3.028 (and of course CV4.1), the problem disappeared

if fact you can know in advance if SSSU will work or not by checking the Vdisks cache policy from CV, it is seen as "Unknown" in case of the problem.

hope this helps.

Farid

[Pat Obrien_1]

I am using the following sssu with cv 4.1 "SSSU for HP StorageWorks Command View EVA 4.1 [v4.1.12]" and working fine with eva5K vcs 3.020, 3.025, and 3.028.