Vdisk presentation using SSSU

[Joseph W Faske]

In the event of an extended hardware outage, we use our development host system as the backup to our production system. Both systems are connected to our EVA3000 SAN.

To do this, we just have to swap the presentation of our vdisks in the EVA3000 between the two hosts. We'd like to use SSSU to script the switch, because with the number of vdisks we have, this can take over an hour using the GUI. Problem is, we haven't been able to figure out the commands that only do presentation in SSSU.

Any help would be greatly appreciated.

[Uwe Zessin]

It's the "ADD LUN" command.

I suggest you use SSSU to take a "CAPTURE CONFIGURATION" (you should do that ALWAYS after making a change to your EVA), extract the "ADD LUN" commands from the original server and then modify them to suit your needs.