Storage Software
cancel
Showing results for 
Search instead for 
Did you mean: 

sssu Operational_State codes

 
Dave La Mar
Honored Contributor

sssu Operational_State codes

Is there a list of the possible codes for the above field on a Show VDISK command?
We are a week into a new EVA and have completed the scripting for "add" to created a clone. Now we are scripting the "delete".
What we want is a check of the Operational State, not just the return code of the command.
Re: Should we issue a delete when a delete is in progress, this is a "no harm, no foul" condition, to us, and we want a script to continue. Thus a return code 1 here is not a vlid reason to exit.
I can see an 8 as the Operationsl_State when the delete is issued while a delete is already in progress.
But, what other codes are there. The manual we have does not specify the different available codes.

Any input appreciated.

Regards,
dl

 

 

P.S. This thread has been moved from  Disk Array to HP Storage System Scripting Utility (SSSU). -HP Forum Moderator

"I'm not dumb. I just have a command of thoroughly useless information."
1 REPLY
Dave La Mar
Honored Contributor

Re: sssu Operational_State codes

Closing due to a lack of response.
Have found other means to accomplish our needs.
dl

"I'm not dumb. I just have a command of thoroughly useless information."