Storage Software
cancel
Showing results for 
Search instead for 
Did you mean: 

sssu syntax to add newly installed disks to disk group

SOLVED
Go to solution
Matt Shaffer_1
Regular Advisor

sssu syntax to add newly installed disks to disk group

I have an EVA 8000. We just purchased 22 additional 300G disks. We currently have 109 in the disk group. I realize that adding 19 to end up with a total of 128 is best. I want to add these disks to my disk group using sssu. I can't figure out the syntax to do so. I would think it would be with the add command but that doesn't seem to be it. This seems like a very easy thing to do so I'm a little ashamed that I'm opening up a forum. Please help.

thanks
Matt
2 REPLIES
Uwe Zessin
Honored Contributor
Solution

Re: sssu syntax to add newly installed disks to disk group

I've checked Command View versions 6 + 9, but I could not find the ability to group a specific disk drive to a specific disk group.

You can, however tell a disk group to add a number of disk drives and the EVA decides which drives to take:
E4K> set disk_group "\Disk Groups\DG01" add = 19
.
Matt Shaffer_1
Regular Advisor

Re: sssu syntax to add newly installed disks to disk group

i decided to just do this action via command view. seems like there should be a better command line option though. thanks.