DL100 G2 Broadcast

[DSmithUK]

Hi all,
Hopefully you can help me with the following query:

We have identified a gratuitous ARP request broadcast that appears on our network every 2 seconds and originates from our DL100 G2 storage server - on Wireshark the source is listed as 'Inventec_e5:c3:02'. The request is looking for the IP 192.168.0.10 (our internal network is using the 172.27.x.x range).

In the Server Management System program we found an 'IPMI Configuration' section that has an IP address entry matching the 192 address above but there appears to be no way of turning it off.

Does anyone have any ideas about how we can go about disabling/suppressing this broadcast?

Thanks for your time folks.
Dan

[peyrache]

hello
did you already configure DL100 (ip address mask , name , etc...)
seems waiting to be configured only
let me know
JYP

[DSmithUK]

Thanks for your reply.

Yes we have configured the server's IP address, mask, computer name etc in Windows.

I've checked through the HP SMS console for any other fields that I can configure but not found anything.

Is there anywhere else that I should have checked and configured but haven't?

Thanks again,
D

[peyrache]

shall you post network traces please ?
thanks
JYP

[DSmithUK]

I've attached some network traces on the first post, please do let me know if you need anything different.

[peyrache]

please post full trace (even no decoded)
i need it not only a screen shot
thanks
JYP

[DSmithUK]

Here you go. The IP that was 192.168.0.10 is now 172.27.0.110 as I've changed the IP in the IPMI configuration.

Hope that helps!

[peyrache]

hello
where was kept network trace ? directly to server itself ?
also please post events systems applications
from this server
thanks
JYP