HP SureStore CD-ROM Server/Tower 7 (J3277A)

[Martijn_8]

Yep, the upgrade was OK but it made no difference

The part number is also: J3277A.
to bad it just didn't help...

[CA1041016]

OK, thanks for clarifying that. I wonder whether 'Scooter' is still monitoring this message thread? He seems to have succeeded in doing this.
Are you there Scooter? If so, what was the firmware that you used to get it working?

Thanks,
Andy

[BR742453]

Hello Guy's

Just checked in again and I'll have to check the firmware and if we still have the unit here. As my collegue who I flashed the FW with is out of the country right now this will be done after the 1st of Feb 2004. I'll check in again asap.

Kind regards,
SCOOTER

[CA1041016]

That'd be really cool. Thanks Scooter.
Andy

[Jean-Baptiste Morice]

Hi all,

I have a more basic problem.
I have the same CD-ROM server (J3277A)
without any informations on it.

Where can I found the instructions to setup the IP address ?

When this issue will be fixed, I will download the latest firmware.

Thanks in advance.
JBM.

[BR742453]

Hi Guy's Sorry for the late reply but I have been unable to locate the unit where my collegue flashed the axis firmware on and made it work with winXP.

Reply to lats question: Reset the box ping it and ARP and IP to it's MAC.

Default username is "root" and default password is "pass" without quotes.

Factory reset is done by:
1 turning off unit

2 pressing button on the back with paperclip holding down while powering on the unit.

3 hold button until Status/Network leds blink orange with 2 sec. intervalls.

4 release button for 2 seconds and press and hold again for 10 sec or more until Status light is steady orange

5 turn off the unit and wait for atleast 30 second before powering again.

6 use the "arp-s ip mac" command to set the IP on the device.

7 http to the IP...

Kind regards,

SCOOTER

[Michel_48]

Hello,

What Axis type is the same as the J3277A? I want to upgrade my firmware so windows xp clients can browse cd's. SCOOTER told that the lastest version is 5.35 but for what axis cd tower version?

Thanks,
Michel